Sennheiser Freeport - Manual (Page 7)

6
SK 2 bodypack transmitter
Inserting/replacing the battery
We recommend powering the bodypack transmitter by a 9 V PP3
alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery,
the operating time will be drastically reduced.
̈
Open the battery compartment by first sliding the battery
compartment cover in the direction of the arrow. Then flip the
battery compartment cover open.
̈
Insert the battery as shown. Please observe correct polarity when
inserting the battery.
̈
Close the battery compartment.
Note:
When the red LED
·
goes off during operation, you must replace
the battery as soon as possible.
Operating controls
³ ON
/ OFF button
·
Operation and battery status indication, red LED
»
Microphone/instrument input,
3.5 mm jack socket (lockable)
¿
Antenna (can be screwed off)
´
Battery compartment cover
² MIC
/ INST slide switch
¶
Serial number
º
Channel selector switch CH (1 to 4)
¾
Sensitivity control GAIN
µ
Type plate
¸
Belt clip
·
freeport_514013_0808_Sp5.book Seite 6 Mittwoch, 26. November 2008 2:16 14