Sony HT DDW1600 User Manual

Page 75

Ad
dit
ion
al I

rmatio

The surround effect cannot be
obtained.

• Make sure the sound field function is on

(press MOVIE or MUSIC).

• Sound fields do not function for signals

with a sampling frequency of more than

48 kHz.

Dolby Digital or DTS multi channel
sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS
format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,
check the audio setting (the settings for the
audio output) of the connected component.

The MULTI CHANNEL DECODING lamp
does not light up.

• Check that the playback component is

connected to a digital jack and the input is
selected properly on this receiver.

• Check whether the input source of the

software being played back corresponds to
the multi channel format.

• Check whether the setup on the playback

component is set to multi channel sound.

Video

There is no picture or an unclear
picture appears on the TV screen or
monitor.

• Select the appropriate input using the input

buttons.

• Set your TV to the appropriate input mode.
• Move your audio components away from

the TV.

• Assign the component video input

correctly.

• Depending on the DIGITAL MEDIA

PORT adapter, video output may not be
possible.*

The source image input to the HDMI
jack on the receiver is not output from
the TV.

• Check the HDMI connection.
• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with the each component.

• Assign the HDMI input correctly.

Recording cannot be carried out.

• Check that the components are connected

correctly.

• Select the source component using the

input buttons.

* Models of area code SP, AU, TH only.

continued