Sony HT DDW1600 - Manual (Page 57)

57 GB
En
jo
yi
n
g
Surr
ou
nd
So
un
d
Using only the front
speakers and sub
woofers
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers and the sub
woofers.
When multi channel surround formats are
input, the signals are downmixed to 2 channel
with bass frequencies being output from the
sub woofer.
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the sub
woofer.
Press 2CH.
Note
To listen to 2 channel stereo sources using the front
left/right speakers and a sub woofer, select “A.F.D.
AUTO”.
This receiver will generate a low frequency signal
for output to the sub woofer when there is no L.F.E.
signal, which is a low-pass sound effect output from
a sub woofer to a 2 channel signal.
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
“S.F. CLR.” appears on the display and
all sound fields are reset to their initial
setting.
1 2 3
2CH A.F.D. MOVIE MUSIC
AMP MENU
SAT TV SA-CD/CD TUNER
2CH
?/1
AUTO CAL MIC
AUTO CAL
TUNING MODE
TUNING – +
PHONES
MEMORY/ ENTER SLEEP DIMMER
MULTI CHANNEL DECODING
SUR BACK
DECODING 2CH A.F.D. MOVIE MUSIC MODE SPEED
X-ROUND
DISPLAY INPUT MODE
INPUT SELECTOR
MASTER VOLUME
VIDEO 3 IN/PORTABLE AV IN
VIDEO L AUDIO R
1,2
2