Samsung DOT MATRIX SRP-270 - Manual (Page 5)

Samsung SRP-270 Setup & Service Information Driver Installation Information
•
5
Windows 2000 Generic / Text Driver Settings
1. Click the Start button, and then choose Settings, and then choose Printers.
2. From the printers dialog, right click the Generic / Text Only driver and choose
Properties.
3. From the Generic / Text Only dialog box, click the Printer Commands tab:
4. For the cash drawer command, in the Begin Print Job field:
Type: “<1B>p<00>”
5. For the auto cut command, in the End print Job field:
Type: “<1B>m”
6. Click OK to save the new settings.
Cash Drawer
Command
Auto Cut
Command
NOTE:
To enter these
commands, it may
be necessary to
activate the Num
Lock and use the
10-key pad on your
keyboard.