Setting up the channel list - initial setup – Sony GRAND WEGA KDS-60A2000 User Manual
Page 21
Getting Started
21
Ge
tting Started
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-11(1)
F:\Worker\SONY SXRD-A EN\2686615111(051006)\020GET.fm
masterpage:3 columns Right
Setting Up the Channel List - Initial Setup
After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen
appears when you turn on the TV for the first time after hooking it up.
1
Press
to turn on the TV.
The Initial Setup screen appears.
2
Press
V/v to highlight the on-screen
display language. Then press
. The
message “Start auto program now?”
appears.
3
Press
V/v to highlight “Yes” then press
.
Auto Program performed through Initial Setup will automatically create a
list of receivable channels from both VHF/UHF antenna and cable TV
channels if both sources are connected.
If you choose to set up the channels at a later time, select the Auto Program
option in the Channel settings to scan available channels (see page 41).
✍
If you select "No" during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.
TV POWER