Sony VPL-CS1 - Manual (Page 16)

VPL-CS1
4-074-278-11 (1)
C:\MUN\Data\FM\VPL-CS1\VPL-
CS1.nouhindata\407427811VPLCS1WW\02GB-
VPLCS1WW\04SET.fm masterpage:Left
GB 16
Connecting the Projector
To connect an IBM PC/AT compatible computer
When you use a USB mouse and USB equipment
• When you use the supplied application software, connect your computer
as illustrated above. This application software and the USB hub function
can be used on a computer loaded with Windows 98 preinstall model.
• As the projector recognizes the USB mouse when the computer is
connected to the USB connector, do not connect anything to the PS/2
mouse port.
• Your computer may not start correctly when it has been connected to the
USB connector on the projector via the USB cable. In this case, first
disconnect the USB cable, restart the computer, then connect the
computer to the projector using the USB cable supplied with the
projector.
On the USB hub function
When connecting the projector to a computer by using the USB cable for the
first time, the computer recognizes the following devices automatically.
1 USB hub (general use)
2 USB human interface device (wireless mouse function)
3 USB human interface device (projector control function)
Excepting these devices above mentioned, the computer recognizes the device
connected to the downstream connector on the projector.
Notes
INPUT A S VIDEO VIDEO MOUSE AUDIO
Rear side
USB equipment
USB cable A type – B type (supplied)
Stereo audio connecting cable (not supplied)
HD D-sub
15-pin cable
(supplied)
to USB connector
to monitor output
to audio output
Computer