Sierra Housewares S5012 - Manual (Page 60)

Areas
7
56
From the Area Status Menu,
you can enter one command
which instructs your system to
arm all of the areas to which you
have rights.
NOTE: If any of the areas are
not ready to be armed, none of
your assigned areas will be
armed when you enter this
command. Instead, your key-
pad displays the Zone Status
Menu of the first area which is
not ready to be armed. You
must correct or bypass any
trouble or faulted zones before
arming can take place.
NOTE: If an area is already
armed, it will not be affected by
a command to arm all areas.
Thus, for example, if Area 4 is
armed with home-arming, and
a command is issued to arm all
areas with full arming, Area 4
will remain armed with home-
arming.
Arming Multiple Areas
To Arm All Areas:
1. Enter your user code. You see
something like this:
AREA 12345678
STATUS RNAHIRAH
2. To arm all of your assigned
areas using full arming, press
.
3. To arm all of your assigned
areas using home arming,
press the key fol-
lowed by the key.
4. To arm all of your assigned
areas using instant home-arm-
ing, press and hold the
[instant] key for 2
seconds until you hear two
beeps. Then, press the
key.