Swann 4-Alert SW242-DAL - Manual (Page 7)

User Manual
Chapter 4: Starting the DVR
4.1 Detecting Installed Hard Drive
- 4 -
4.2 Recovering Lost Data
4.3 Restore Recording Feature
Checking HDD ……
MASTER…
RECOVER HDD?
04811-101735
(SELECT)YES/(MENU)NO
Power Error Detected
Restore Hard Disk (Master) OK
Restore REC Mode………… OK
On the screen it will show the hard drive
information. If no hard drive is detected,
check that the HDD is set to master and the
tray is locked.
After connecting the power, the system
will boot-up and detect the installed hard
drive.
A power failure can cause data to be lost,
however the DVR system will automatically
recover lost data after power is reconnected.
If a power error occurs during
recording process, the system will
automatically resume recording after
power is reconnected.