11 s – Samsung SF-360 Series User Manual

Page 48

6.11

PECI

TAM options (SF-365TP only)

DRPD Mode

DRPD (Distinctive ring) is a service provided by some telephone companies that assigns two phone
numbers to one phone line, each of which makes your phone ring differently. If you subscribe to this
service, you can program your machine to learn one phone number and distinctive ring for incoming
faxes.
As the display shows, call this fax from other fax machine. The machine will learn the ring pattern and
displays

DRPD OK

when finished. Now, you can use the

Rcv.Mode/Darkness

to select DRPD receiving

mode.

Remote Test

This lets the service center check the status of your machine to find out if there is anything wrong.

Resolution

Sets the default resolution when copying and faxing.

Darkness

Sets the default contrast when copying and faxing.

Image TCR

You can prevent the Image TCR from being included in the confirmation report for privacy or security
protection.

Dial Mode

Set the dialling mode to the type of the exchange to which you are connected.

Behind PABX

If your machine is connected to the line from PABX (Private Automatic Branch eXchange), you need to
enable this option by selection

a. SF-360/SF-361P only.

b. Error Correction Mode

c. This option may not work when connected to a PABX.

d.Distinctive Ring Pattern Detection

e.One or more options may not appear in the display depending on your country. If so, it is not applicable to your machine.

Options

Suboption

Save Charge

Lets you dial into your machine from a remote phone and check whether anyone has left a message with-
out being charged. When

Save Charge

, the machine answers your call on the number of rings you

have specified in the

Rings to Answer

option. If there is no message, the machine answers on the second

ring after the number of

Rings to Answer

. This gives you time to hang up the phone before the machine

answers and saves the price of the call.

Call Monitor

Enables you to hear callers leave messages on your machine.

ICM Record Time

You can select the maximum time allowed for caller messages.

Remote Password

You can change the three-character password used to access your machine from a remote phone. The
password is preset to “#139#” at the factory. The first and the last #’s are fixed, but you can change the
three middle numbers.

Silence Action

In TAM mode, the machine decides the next action when silence is detected for 10 seconds. Available
suboptions are:

• Receive Fax: Switches to FAX Receive Mode.
• Record Silence: Keeps the recording silent.
• Disconnect: Disconnects the line and returns to Standby Mode.

Howler Action

In TAM mode, the machine decides the next action when a howling is detected for 9 seconds. Available
suboptions are:

• Record Howler: Disregards howling.
• Disconnect: Disconnects the line and returns to Standby Mode.

Message Forward

Forwards a message to your new location whenever a caller leaves a message. For more information, see
"Message forwarding (SF-365TP only)" on page 5.5.

Option

Suboption