Broadcasting, Delayed fax – Samsung SF-360 Series User Manual
Page 33
5.2
Broadcasting
With Broadcasting you can programme your machine to automatically scan and send documents to a number of
different recipients. The documents are automatically erased from memory when Broadcasting is finished.
1
Turn the document face down and feed it into the machine.
2
Press
Menu
.
3
Press
Scroll
buttons to choose
ADVANCED FAX
and press
OK
.
4
Select
Set Broadcasting
by pressing
Scroll
buttons, and press
OK
.
5
Enter the fax number.
• You can enter a One-Touch or Speed Dial location number, which consists of two digits.
• You can enter 5 fax numbers into one job.
6
Press
OK
when the correct number appears in the display.
• If you have more destinations, select ‘
Y
’ and press
OK
when asked
Another? Y/N
and repeat steps from 5.
• If you have finished entering all the numbers, answer ‘
N
’ and press
OK
.
7
Press
Start Fax
.
• The document will be scanned into memory before transmission.
Delayed fax
You can set your machine to send a fax at a later time when you will not be present. Normally it is cheaper to
send a fax at night because telephone rates are lower than they are during the day.
1
Turn the document face down and feed it into the machine.
2
Press
Menu
repeatedly until
ADVANCED FAX
appears, and press
OK
.
3
Select
Set Delayed Fax
by pressing
Scroll
buttons, and press
OK
.
4
Enter the fax number.
• You can enter a One-Touch or Speed Dial location number, which consists of two digits.
• You can enter 5 fax numbers into one job.
5
Press
OK
when the number appears in the display.
• If you have more destinations, select ‘
Y
’ and press
OK
when asked
Another? Y/N
and repeat steps from 5.
• If you have finished entering all the numbers, answer ‘
N
’ and press
OK
.
6
Enter the name if you want to name the transmission.
If not, skip this step.
7
Press
OK
.
8
Enter the time the transmission starts, in 24-hour format.
• For example, Enter 2230 for 10:30 P.M.
9
Press
OK
when the time appears correctly in the display.
• The document will be scanned into memory before transmission, and be sent at programmed time.