Sony SIR4260V - Manual (Page 13)

COLOR DOME CAMERA User Guide 24 COLOR DOME CAMERA User Guide 25
2. Select a desired mode using the Function Setup switch according to the picture display you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
- IR MODE : When IR LED is turned on in B/W, the objects can
be clearly identified due to the function that
decreases screen saturation of objects within a
short distance.
· TOP/BOTTOM/LEFT/RIGHT : Adjust the range according to
the location of objects.
- IR LEVEL : Select LOW when objects appears within a short distance or select HIGH when
objects appears within a long distance on the screen.
AUTO : The mode is switched to ’Color‘ in a normal
environment, but switches to ’B/W‘ mode when
ambient illumination is low. To set up the switching
time for AUTO mode, press the Function Setup
switch. You can turn on or off the burst signal on
B/W mode.
AUTO SETUP
▶ 1.BURST MODE ON
2.COLOR->B/W
DURATION FAST
DWELL TIME 3SEC
3.B/W->COLOR
DURATION FAST
DWELL TIME 10SEC
4.RETURN
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup
switch so that the arrow indicates ‘DAY/NIGHT’ .
DAY/NIGHT
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
* The day/night switching point of the
camera can be adjusted.
Color ➞ B/W B/W ➞ Color
Fast 2.5 lux 5 lux
Slow 1 lux 10 lux
Operating Your Camera
- BURST MODE : You can turn on or off the burst signal on
B/W mode.
- DURATION : You can select brightness of illumination about changing the day/night mode.
- DWELL TIME : You can select the duration time about changing the day/night mode. …
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
• When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR'
mode and 'AUTO' mode can not be selected.
Notes