Samsung iDCS500 - Manual (Page 9)

Samsung iDCS500 SLT User Guide
–3–
SYSTEM TONES
The system provides several tones to assist you. Some of these tones are already
familiar to you.
Dial Tone—A steady tone that indicates you can begin dialling.
Ringback Tone—Indicates the station you dialled is ringing.
Busy Tone—Indicates the station you dialled is busy.
DND/No More Calls Tone—Fast busy tone indicates the station you dialled is in Do
Not Disturb mode or cannot receive any more calls.
Transfer/Conference Tone—Indicates your call is being held and you can dial an-
other number.
Confirmation Tone—Very short beeps followed by dialling tone indicates you have
correctly set or cancelled a system feature.
Error Tone—A distinctive two-level beeping tone indicates you have done something
incorrectly. Try again.
Note: These system tones apply to phones in the UK. They may be different for users in
other countries.
SYSTEM ACCESS CODES
Your system is configured with default system access codes for using the various
features described in this guide. These codes are also printed on the back cover of
this guide for quick reference. However, your system may have been set up to use a
different set of codes. Therefore, if your phone does not work as described in this
guide, see your system administrator for advice.
A
‘Changed System Access Codes’ table has also been provided at the end of this
guide for you to enter the codes required by your system, if they are different from
the default codes.