Samsung iDCS500 - Manual (Page 16)

Samsung iDCS500 SLT User Guide
–10–
TRANSFER RECALL
All unscreened transfer calls and camped-on calls sent from your station will auto-
matically recall to you if they are not answered by the destination station within a
preprogrammed time.
When your phone rings, lift the handset to answer the recall. If you do not answer
this recall within a preprogrammed time, it will go to the system operator.
CALL WAITING
If an external call has been camped-on to your phone or another station is camped-
on to your station, you will receive a camp-on tone indicating another call is waiting.
1. Press Recall and dial 11 to put the first call on hold.
2. Hang up and the waiting call will ring.
3. Lift the handset to answer.
4. Complete this call by transferring it or hanging up.
5. Lift the handset and dial 11 to return to your first call.
SETTING UP A CONFERENCE
You may conference up to five parties (you and four others) in any combination of
external lines and internal stations, in any order.
1. While you are engaged in a conversation, press Recall, listen for transfer
tone and dial 46. You will receive conference tone.
2. Make another call, either internal or external, then press Recall and listen
for conference tone.
3. Repeat step 2 to add all the parties you require.
4. When all parties are added, press Recall to start the conference.
To drop a party from your conference call:
1. Press Recall, listen for confirmation tone and dial the extension or line
number that is to be dropped.
2. When you hear conference tone, dial 46 to rejoin the remaining parties.
To leave the conference yourself :
Hang up. Control will be passed to the first internal station that was added. If there
are no internal stations and you wish to leave external lines connected together in a
trunk to trunk (unsupervised) conference, press Recall, listen for dial tone, and dial
your own extension number. When the parties on the external lines have finished
and hang up, the lines will release automatically.