Sharp Aquos LC 46D62U - Manual (Page 48)

47
1
2
3
4
1
2
3
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable
converter connected to the TV can be operated using
1
to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
4 CH r/s
Press CH r or CHs to tune in a higher or lower
channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9 , • (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 ENTER , a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the
SAT GUIDE screen or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
Other viewing options