Samsung SP-D400S User Manual
Page 13
8. P.SIZE
Used to adjust the size of picture screen.
9. COMP
Used to switch to COMPONENT Mode.
10. OFF (
)
Used to turn off the projector.
11. RETURN (
)
Returns to the previous menu.
12. BLANK
This is used to turn off the screen temporarily.
It is released when any button other than the ON/OFF button is pressed.
13. INFO STILL
INFO: Used to check source signals, picture setup, PC screen adjustment and lamp lifespan.
STILL: Used to see still images.
14. HDMI
Used to switch to HDMI Mode.
15. INSTALL
Used to flip or reverse the projected image.
16. P.MODE
Used to select Picture Mode.
17. PC
Used to switch to PC Mode.
|
Product Features
|
Product Views
|
Remote Control
|
Product Specifications
|
Design and specifications of the product may be modified without prior notice for better performance.
Specifications
Model
SP-D400S
Panel
Size
16.5 mm / 0.65 inch
Resolution
XGA (1024 x 768)
Manufacturer
Texas Instrument
Lamp
Type
280 W
Life Time
2,500 Hours
Manufacturer
Philips
Color
18.9 M (1024 x 768 x 3 x 8bit)
Resolution
Optimum
resolution
1024 x 768 @ 60Hz
Maximum
resolution
1280 x 1024 @75Hz
Input video signal
Video, S-Video, Component, Analog PC, HDMI
Input synchronization signal
Separate H/V sync, TTL
Maximum Pixel Clock
136.75 MHz
Diagonal screen size
40 ~250 inch
Projection Range
1 ~10 m