SOEHNLE 2761 - Manual (Page 10)

_ Switching and checking
in the weighing mode
9
Set points (limit values) can only be set in weighing and counting mode. 3
memories for limit values are available for each connected scale: Entry must be
additive, i.e. the weight of first limit value should be added to the second.
Limit values affect the net weight.
Loading memory
Enter the value for the set point with the
numeric keyboard.
Press the ”Ld” command key, followed
by the number of the memory.
Confirm your entry by pressing the
function key.
Memories 2 and 3 are entered and
displayed in the same way.
Recalling of stored values
Press the ”i” command key and the
number of the memory containing the
value you require.
Confirm your entry with the ” ”
function key.
Weighing with limit values
Tare the container
Place the items to be weighed on the scale.
The relevant symbol goes out when the
appropriate set point/limit value reached.
Clearing memory
Press the ”CI” command key.
Now enter the number of the memory
you wish to delete.
Confirm your entry with the appropriate
function key. Simply overwriting the
memory as described under ”Loading the
memory” also deletes the current value.
Control weighing
Enter the upper and lower tolerance
weights as in ”Loading memory” in S1
and S2. Place the items to be weighed on
the scales. The current weight value and
the tendency symbol appear on the main
display:
Weight is less than set value ”S1”
Weight is within the tolerance ”S1-S2”
Weight is greater than set value ”S2”