Sharp AR-163 User Manual
Page 24
22
MAKING COPIES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
) key. The vertical and horizontal ratios will be alternately
displayed.
7
Ensure that copy paper of the desired size is installed in
the paper tray.
●
If an optional paper feed unit is installed:
Use the ORIGINAL SIZE ENTER (
) key to select the
original size. Copy paper of the appropriate paper size will be
automatically selected depending on the original size and copy ratios.
If desired, another paper tray can be selected by pressing the TRAY
SELECT (
) key.
8
Enter the desired number of copies.
9
Press the START (
) key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
,
) key or a zoom (
,
)
key. Then, perform step 3 and the succeeding
steps.
●
To cancel this function, press the XY-ZOOM (
)
key again.