Sunfire SRS210W-C - Manual (Page 19)

User's Manual
Installing the grille assembly
1. Secure the grille frame to the
woofer baffle using 12 screws
supplied in the grille package.
2. If you have already painted the
frame and grille, please jump to
step 6.
. Fit the supplied cardboard paint
shield into the frame to cover the
woofers and baffle. Press the grille
in place temporarily.
4. Paint the frame and grille to match
the wall and decor.
5. When the paint is dry, carefully
remove the grille and discard the
paint shield. (It is important to
remember this step!)
6. Carefully press the grille into the
frame, and make sure it is fully
pressed home on all sides.
Conclusion
This completes the SubRosa in-wall
subwoofer installation.
For details regarding the operation of
the subwoofer and the automatic equal-
ization procedure, please refer to the
user's guide that comes with the Sunfire
SubRosa amplifier.
© 2007 Sunfire Corporation.
All rights reserved. Sunfire Corporation
reserves the right to improve its products
at any time. Therefore, specifications and
installation details are subject to change
without notice.
Manual 913-142-00 Rev 7
Grille Install
19
The grille installed into the frame
Location of the grille frame screws