Sanyo DWM-2600 - Manual (Page 18)

-E17-
3 2 4 1
2
4
1
MENU
Play Movie Languages & Audio Set-Up
Subtitles
Theatrical Trailers
Scene Selections
Basic Playback
When operation buttons are pressed, that operation is displayed
on the TV screen. The display disappears after several seconds.
1. Press [z/ON] to turn the power on.
2. Press [FUNCTION] to select the “DVD/CD” function.
3. Push the disc (label facing up) gently into the loading slot until
automatic loading begins, then release the disc.
•
“LOADING” ---> “READING” appears on the FL display.
Label facing up
CAUTION:
•
Do not apply pressure to the disc after automatic
loading begins.
• Do not pull the disc out while the disc is retracting
into the loading slot. This will damage the inside of
the unit and the disc.
Note:
Some DVD video discs may start playback automatically.
4. Press [a] to start playback.
Example (DVD, FL display):
Chapter number Elapsed playing time
Notes:
•
In some discs, even if 4:3 PS is selected, the black bands
may remain on the screen.
• If the disc is loaded with the label side downward (and it is a
single sided disc), or if a badly scratched disc is loaded, “NO
DISC” (or “NO PLAY”) appears. If this occurs, load the disc
correctly or replace the disc.
If a DVD disc menu screen appears on the TV screen...
TV
1. Press [o], [a], [p] or [b] (or the number buttons) to select the
desired menu.
2. Press [ENTER].
Playback of the selected menu starts.
Note:
For more details, please refer to the jacket or case of the disc.
Need help? Call
1-800-813-3435
DWM-2600 Page E1-E43.p65 03.12.22, 11:35 AM 17