Sony Camcorder / Wireless Microphone - Manual (Page 7)

SONY
(Betacam SX drop-in configuration)
Models:
DNW-7
DNW-9WS
DNW-90
DNW-90WS
DNV-5 (dockable VTR)
Typical Package:
Required part:
Qty
WRR-855A (tuner) 1
Transmitter 1
Option ( for 2
nd
tuner)
A8278-057-A bracket
1
1
WRR-855A 1
BTA-801 (ADAPTER) 1
Transmitter 1
1
The A8278-057-A bracket
Is supplied with all Digital Betacam
and HDW-700A camcorders, as well
as with the Optional BKW-L601
DNW-9WS, shown with
WRR-855A (above) in
breakaway. BPL-60 battery is
mounted via “V”-mount to rear
of camera. WRR-855A power
and audio connections are
automatically made via multi-
pin connector inside camera
slot.
DNW-9WS, shown with one
WRR-855A installed in same
configuration, plus a second
WRR-855A mounted to rear with
A-8278-057-A mount and BTA-
801A adapter. WRR-855A power
is via 4-pin DC connector
(supplied with BTA-801) to
camera accessory power jack
(shown) and audio via 12” XLR to
XLR connection (user supplied).
Note: As below in configuration # 2, an Anton Bauer battery adapter,
with their optional ABWMKKIT bracket, may be added for mounting
of an additional tuner with the above listed models. WRR-810A or
WRR-805A may also be used as a second tuner with the existing
bracket (plus X-0248-167-1 dual plate adapter for WRR-805A).
*SX camcorder shown with internally
mounted WRR-855A and WRR-810A
mounted externally with the optional
A-8278-057-A bracket.
DNW-9WS, shown
with WRR-855A in same
configuration (installed-rear angle
view)
Configuration # 1: WRR-855A/810A UHF Diversity Tuners
-5-
Fig. 1 Fig.2
Fig. 3
Fig.4