Sony Camcorder / Wireless Microphone - Manual (Page 11)

Will mount 1 or 2 WRR-805As
(screws supplied) to a camcorder
supplied with an NP-1, DC-500
or an A-8278-057-A bracket. The
clip on back of WRR-805A case
slides on.
For mounting of any Sony UHF
portable tuner (with tuner
supplied hardware shown) to
most Sony professional
camcorder models. Included with
BKW-L601 battery mount.
Using the “V” wedge mount
system allows WRR-855A to
be mount to DVCAM models
and provides power and audio
connections to/from the
camcorder
Allows WRR-855A to be
mounted to Sony
camcorders equipped with
an A- 8278-057-A or
NP-1, DC-500
Battery case/ mount. Supplied
with Betacam, Betacam SP
and some DVCAM models.
Allows mounting of BTA-
801A, WRR-810A or X-
0248-167-1 bracket
For the BP-L90 battery.
Optional battery case/mount for
Betacam, Betacam SP and some
DVCAM models. Allows
mounting of BTA-801A, WRR-
810A or X-0248-167-1 bracket
Included with the BTA-801A
and WRR-810A. Mounts to 4-
hole system on NP-1, A-8278-
057-A, etc… Clips on the BTA-
801A & WRR-810A insert into
these.
Converts the locking 1/8”
mini-plug output of WRR-
805A to balanced male XLR.
This allows the WRR-805A
to be connected to any
professional camcorder.
Top
Piece
Bottom
Piece
(supplied accessory ).
Main case (left) can be
mounted to optional dual
bracket. Detached Velcro
strap (right) allows
mounting to handle of
consumer camcorders.
Anton Bauer Battery Adapters/Brackets *
* Illustration shown provided by Anton Bauer
X-0248-167-1 Dual Mount A-8278-057-A Mounting Bracket. CA-WR855 Adapter. BTA-801 Adapter.
NP-1 Box DC-500 Box Supplied Hardware. K-1334 Adapter Cable
WRR-805A Case / mount.
* For DVCAM
* For all other broadcast
models
Optional Mounting Hardware & Accessories
-9-
Fig. 16