Samsung SF4500 - Manual (Page 43)

2.20 Receiving a Fax
Receiving Automatically in Fax Mode
1. Press Rcv.Mode until the Fax lamp lights.
2. When you get a call, the machine answers the call on the second ring
and receives a fax automatically. You can change the number of rings.
See ÔANSWER ON RINGSÕ on page 2.39.
To adjust the Ringer Volume, press Menu , System Setup on the One-
Touch keypad, Start to access Ringer Volume mode, then use
¹ or to
choose the desired loudness.
Receiving Automatically in Tel/Fax Mode
1. Press Rcv.Mode until the Tel/Fax lamp lights.
2. When you get a call, the machine answers the call on the second ring
and receives a fax automatically. You can change the number of rings.
See page 2.39.
3. If the machine does not sense a fax signal, it will give another ringing
tone to tell you it is a phone call.
4. Lift the handset to answer the call. If you do not pick up the handset
within a specified time, the machine will switch back to automatic fax
reception mode.