Snapper 522E - Manual (Page 24)

22
ENGINE:
5.25 Series Briggs & Stratton
Make Briggs & Stratton
Domestic
Model / Type
09A413 / 0202E1
CE
Model / Type
09A413 / 0203E1
Gross Torque* 5.25 ft. lbs. @ 3060 rpm
Displacement 9.02 Cu. in (148 cc)
CHASSIS:
Spout Rotation 190 Degrees
Auger Diameter 9” (22.9 cm)
Tire Size 7” x 1.5” (17.8 cm x 3.8 cm)
DIMENSIONS:
Effective Clearing 22” (51 cm)
Width
Length 42” (107 cm)
Height 42” (107 cm)
Weight 75 lbs (34 kg)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM;
horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among
other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on
which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas
engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature,
humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton
may substitute an engine of higher rated power for this Series engine.
REPLACEMENT PARTS
Replacement parts are available from your authorized
dealer. Always use genuine Simplicity/Snapper Service
Parts.
TECHNICAL MANUALS
Additional copies of this manual are available, as well as
fully illustrated parts lists. These manuals show all of the
product’s components in exploded views (3D illustrations
which show the relationship of parts and how they go
together) as well as part numbers and quantities used.
Important assembly notes and torque values are also
included.
Engine Oil
Touch-Up Paint
Grease Gun Kit
8 oz. Grease Tube Tire Sealant
Degrimer/Degreaser
Gas Stabilizer
MAINTENANCE ITEMS
Many convenient and helpful service and maintenance
items are available from you authorized dealer. Some of
these items include:
Model:
Mfg. No.:
Your Name:
Address:
City, State, Zip:
Visa/Mastercard No.:
Card Expiration Date:
Specifications
Parts & Accessories
For applicable manuals currently available for your
model, contact our Customer Publications Department at
262-284-8519. Have the information listed in the box
below available when phoning in your request.
Technical manuals can be downloaded from:
www.simplicitymfg.com
www.snapper.com