Sony CFD-W57L - Manual (Page 24)

The Timer
23 EN
The Timer
Tips
• The display window
does not light while the
waking up timer is on.
• You can have the
player go on the next
day at the same time.
Just press STANDBY
until the
t indication
appears in the display.
The preset settings
remain until you reset
them.
6
Press TUNING/TIME SET + or – to set the
volume, then DISPLAY•ENTER MEMORY.
7
Press STANDBY.
The t indication lights up and the power goes off.
At the preset time, the power will go on, and the
music will play. Then the power will go off at the
preset time, and the player will enter into the
standby mode.
To check/change when the playback will start
Press TIMER, then DISPLAY•ENTER MEMORY. Each
time you press DISPLAY•ENTER MEMORY, a stored
setting is displayed in the set order. To change the
setting, display the setting you want to change and re-
enter it.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer
playback will start at the preset time.
In case of the radio, however, if you listen to the
station which is different from the one you tuned in
in step 1 on page 22, you will hear that station at the
preset time. Make sure to tune in the station you want
to listen to before you turn off the player.
To stop play
Press OPERATE (or POWER).