Subaru Impreza 2004 - Manual (Page 11)

ME(H4DOTC)-10
MECHANICAL
General Description
3. DOHC TURBO MODEL (AUSTRALIA MODEL EXCEPT FOR STi MODEL)
NOTE:
STD: Standard
I.D.: Inner Diameter O.D.: Outer Diameter OS: Oversize US: Undersize
Crankshaft
bearing Crankshaft bearing thick-
ness
#1, #3
STD 1.998 — 2.011 mm (0.0787 — 0.0792 in)
0.03 mm
(0.0012
in) US
2.017 — 2.020 mm (0.0794 — 0.0795 in)
0.05 mm
(0.0020
in) US
2.027 — 2.030 mm (0.0798 — 0.0799 in)
0.25 mm
(0.0098
in) US
2.127 — 2.130 mm (0.0837 — 0.0839 in)
#2, #4, #5
STD 2.000 — 2.013 mm (0.0787 — 0.0793 in)
0.03 mm
(0.0012
in) US
2.019 — 2.022 mm (0.0795 — 0.0796 in)
0.05 mm
(0.0020
in) US
2.029 — 2.032 mm (0.0799 — 0.0800 in)
0.25 mm
(0.0098
in) US
2.129 — 2.132 mm (0.0838 — 0.0839 in)
Engine
Type
Horizontally opposed, liquid cooled, 4-cylinder,
4-stroke gasoline engine
Valve arrangement Belt driven, double overhead camshaft, 4-valve/cylinder
Bore
× Stroke
mm (in) 92
Ч 75 (3.62 Ч 2.95)
Piston displacement cm
3
(cu in) 1,994 (121.67)
Compression ratio 9.0
Compression pres-
sure (at 200 — 300
rpm)
kPa (kgf/cm
2
, psi) 1,108 — 1,304 (11 — 13, 161 — 189)
Number of piston rings Pressure ring: 2, Oil ring: 1
Intake valve timing
Opening
Max. retard ATDC 7 °
Min. advance BTDC 27 °
Closing
Max. retard ABDC 67
°
Min. advance ABDC 33 °
Exhaust valve timing
Opening BBDC 53 °
Closing ATDC 7 °
Valve clearance
Intake mm (in) 0.20 ±0.02 (0.0079±0.0008)
Exhaust mm (in) 0.35 ±0.02 (0.0138±0.0008)
Idling speed
[At neutral position on MT, or
“P” or “N” position on AT]
rpm
MT
650 ±50 (No load)
800 ±50 (A/C switch ON)
AT
700
±50 (No load)
820 ±50 (A/C switch ON)
Firing order 1 → 3 → 2 → 4
Ignition timing BTDC/rpm
MT 12
°±3°/650
AT 12 °±3°/700