Seagate Barracuda ST318418N - Manual (Page 59)

Barracuda 36ES2 Product Manual, Rev. B 49
Table 6 lists the Standard Inquiry command data that the drive should return to the initiator per the format given
in the
SCSI Interface Product Manual, part number 75789509, Inquiry command section.
[ ]
1
03 means SCSI-3 (Ultra160) implemented.
[ ] 2 02 means response data in SCSI-3 (Ultra160) format. In addition, 12 indicates that the drive uses the hier-
archical addressing mode to assign LUNs to logical units (default is 12).
R# Four ASCII digits representing the last four digits of the product Firmware Release number. This informa-
tion is also given in the Vital Product Data page C0h, together with servo RAM and ROM release num-
bers.
S# Eight ASCII digits representing the eight digits of the product serial number.
[ ]
3
Bytes 18 through 25 reflect model of drive. The table above shows hex values for Model ST336938LW.
Values for all models are listed below:
ST336918N 33 33 36 39 31 38 4E 20
ST318418N 33 31 38 34 31 38 4E 20
ST318438LW 33 31 38 34 33 38 4C 57
[ ] 5 Copyright Year - changes with actual year.
Table 6: Barracuda 36ES2 family drive Standard Inquiry data
Bytes Data (HEX)
0-15 00 00 [03] 1 [12] 2 8B 00 [01] [3E] 53 45 41 47 41 54 45 20 VENDOR ID
16-31 53 54 [33] [33] [36] [39] [33] [38] [4C] [57] 3 20 20 20 20 20 20 PRODUCT ID
32-47 R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
48-63 00 00 00 00 00 00 00 00 0C 00 00 00 00 00 00 00
64-79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80-95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
96-111 00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 [32] COPYRIGHT
112-127 [30] [30] [30] 5 20 53 65 61 67 61 74 65 20 41 6C 6C 20 NOTICE
128-143 72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20