Samsung Digimax U-CA5 - Manual (Page 54)

54
Movie Clip frame stabiliser
This function helps stabilize images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
How to use this function
1. Select the MOVIE CLIP mode by sliding the mode
switch and press the menu button. Press the Left/Right
button to select the [Stabilizer] menu.
2. Select a desired sub menu by pressing the Up/Down
button and press the OK button.
- [Off] : Movie clip frame stabilizer function becomes
disabled.
- [On] : Prevents camera shake during movie
recording. The recording frame range will become narrower than when you select
the [Off] menu. Pre-view frames may not display smoothly on the LCD monitor,
but stored movie clips have no problems.
Stabilizer
Off
On
NOR
When you select the [On] sub menu, the movie clip frame range will be narrow depending
on the movie clip size.
INFORMATION