beautypg.com

Subaru 2008 TRIBECA User Manual

Page 126

background image

3-6

Instruments and controls

meter needles and gauges when the
ignition switch is turned to the

“ON”

position. To change the current setting,
press the trip knob for at least 2 seconds.

: Activated

: Deactivated

With the function deactivated, the combi-
nation meter illuminates as follows:
1. Warning lights, indicator lights, meter
rims, meter needles, odometer, trip meter,
and gauge back lights illuminate.
2. Meter and gauge dials illuminate.
3. Regular illumination ( for driving) be-
gins.

Briefly press the trip knob again. You can
now establish the activated/deactivated
setting for sequential illumination of the

combination meter when the ignition
switch is turned to the

“ON” position. To

change the current setting, press the trip
knob for at least 2 seconds.

: Activated

: Deactivated

Briefly press the knob to return to the A trip
meter indication.

If you turn the ignition switch to the

“LOCK” position, turn the ignition switch
to the

“ON” position, or open and close the

driver

’s door during the setting procedure,

the new setting will be canceled.
Also, if you do not press the trip knob for a
period of 10 seconds, the new setting will
be canceled.

NOTE

. It is not possible to cancel sequen-
tial illumination of the combination
meter while sequential illumination is
actually taking place. Cancel sequen-
tial illumination when regular illumina-
tion (for driving) has begun.

. When you open the driver’s door
with the ignition switch in the

“LOCK”

position, the meters

’ needles and rims

are lit. The illumination stops working
when you shut the driver

’s door or

automatically after 30 seconds.

& Speedometer

The speedometer shows the vehicle
speed.

& Odometer

This meter displays the odometer when
the ignition switch is in the

“LOCK”, “Acc”

or

“ON” position.

The odometer shows the total distance
that the vehicle has been driven.

If you press the trip knob when the ignition
switch is in the

“LOCK” or “Acc” position,

the odometer/trip meter will light up. If you
do not press the trip knob within 10
seconds of illumination of the odometer/
trip meter, the odometer/trip meter will go
off.

This manual is related to the following products: