Sharp Aquos LC 45D40U - Manual (Page 31)

30
Reset
H-Pos. a10 b10
V-Pos. a20 b20 [ 0]
[ 0]
Input 4 (HDMI)
Input 5 (HDMI)
Yes No
Standby Mode
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Standby Mode”, and
then press ENTER.
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
Language setting
You can also select a language from the Setup menu. Select
from among 3 languages: English, French and Spanish.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press ENTER.
1
2
4
3
Selected item
Mode1
Mode2
Description
Starting TV is quick from standby.
Power consumption is small at the
standby.
1
2
4
3
Press MENU to exit. 5
Press MENU to exit.
5
Useful adjustment settings
Press a/b to select “H-Pos.” or “V-Pos.”.
Press c/d to adjust the item to the desired
position.
NOTE
• For resetting adjustments to the factory preset values,
press a/b to select “Reset”, and then press ENTER.
• Adjustments are stored separately according to input
source.
• You can easily move the image position as shown on this
page, but when the power is switched off the image will
return to the previously memorized position.
Image position
For adjusting a picture's horizontal and vertical position.
Press a/b to select “Position”, and then
press ENTER.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
4
3
Selected item
H-Pos.
V-Pos.
Description
Centers the image by moving it to the
left or right.
Centers the image by moving it up or
down.
5
Input Skip
This setting allows you to skip the HDMI Input on the
Input Selection operation.
Press a/b to select “Input Skip”, and then
press ENTER.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
Press MENU to exit.
Press a/b to select the Input (INPUT 4 or
INPUT 5) you wish to skip, and then press
ENTER.
Press c/d to select “Yes”, and then press
ENTER.
4
5
6
Press MENU to exit. 6
D40U_en_g.indd 30 2006/01/23 11:32:23