Sharp Aquos LC 45D40U - Manual (Page 18)

17
20
20
20
Surround : Off Surround : On
Simple button operations for
changing volume/sound
Changing the volume
You can change the volume on the TV or on the remote
control unit.
NOTE
• VOLl/k on the TV operates the same as VOL k/l on
the remote control unit.
Using VOLk/l
• To increase the volume, press
VOLk.
• To decrease the volume, press VOLl.
Audio status
Volume adjustment
* When “Output Select” is set to “Variable”, the indicator on
the screen changes as shown below.
NOTE
• See page 34 for details on the Output Select function. NOTE
• You can have the same settings by choosing “Surround”
on the menu items. (See page 25.)
SURROUND produces Surround effect from the
speakers. Each time you press SURROUND, the
mode changes between On and Off.
Surround sound options
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
Using MUTE on the remote control unit
Mutes the current sound output.
NOTE
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
• Mute will cancel if you press VOLl/k or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
Mute
Press MUTE.
• M will be displayed on the screen for 30 minutes, and the
sound is silenced.
Watching TV
Using SURROUND on the remote control unit
Output Select
Output device
Fixed Variable
Variable sound Mute Speaker
D40U_en_b.indd 17 2006/01/23 11:30:20