Snapper MR SERIES 17 WMR216017BV - Manual (Page 19)

DRIVE SYSTEM SELF-PROPELLED
Footnotes:
TP 400-5001-5-WB-N
Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
"MR" SERIES 17
19
Part No Description Item Qty Note
1 7012354 1 BELT, Poly-Vee
2 7034179 1 LINK, Differential
-- 7051921 ASSEMBLY, Clutch Idler (includes items 3 thru 7)
3 7032832 1 ARM, Clutch Idler
4 7012124 2 PULLEY, Idler
5 7091025 1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
6 7090303 1 NUT, 1/4-28 Hex Top Lock
7 7012117 2 BUSHING, 3/8” Plastic
8 7072284 1 SHAFT, Hex Drive
9 7024521 1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
10 7012316 1 WASHER, 3/8” Flat
11 7012126 1 SPRING, Torsion
12 7012111 1 STUD, Idler (3/8-24 thread)
13 7031873 1 HOLDER, Bearing (Inner Half)
14 7028014 1 BEARING, Ball, .38 I.D. Spherical O.D.
15 7011025 1 O-RING
16 7090289 1 NUT, 3/8-24 Hex Center Lock GR5 or B
17 7031809 1 HOLDER, Bearing (Outer Half)
18 7010937 1 CLIP, Transfer Rod 1/4”
19 7023790 1 ROD, Transfer used on Non-Euro models
-- 7051698 ASSY., Transfer Rod (Incl. items 61, 62 & 63) used on Self-Propelled Euro
20 7046784 1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
-- 7053225 1 ASSEMBLY, Driven Disc (Cantilever) used on Self-Propelled Euro
21 7035477 1 PLATE, Thrust
22 7010746 2 RING, 5/8” External Retaining used on Self-Propelled
23 7026693 1 BALL BEARING, 3/4” I.D. used on Self-Propelled
24 7090981 4 SCREW, #10-32 x 1/4” Self-Tap Machine
25 7032664 1 SHIELD, Hex Shaft used on Self-Propelled Euro
26 7015753 BALL JOINT, 1/4-28 used on Self-Propelled Euro
27 7090095 1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro
28 7015752 1 LINK, Transfer used on Self-Propelled Euro
29 7010121 1 WASHER, 3/4” Shim
30 7090390 3 WASHER, 3/8” Internal Tooth Lock
31 7090122 1 WASHER, 3/8” Flat
32 7091630 3 NUT, 3/8-24 Hex, GR B Was 90155
33 7091511 1 NUT, 5/16-18 Hex GR5 or B Was 90196 (continued on next
page)
34 7090187 1 WASHER, 5/16” Split Lock