Sony DVO-1000MD - Manual (Page 24)

Record
ing
Preparations for Recording
24
Preparations for
Recording
Selecting Input Signals
The INPUT SELECT sub menu of SETUP MENU
allows you to select the input signal to be recorded.
1
Press the MENU button.
The TOP menu appears.
2
Select “SETUP MENU” by pressing the V or v
button and press the b button with “SETUP
MENU” highlighted.
The SETUP MENU appears.
3
Select “INPUT SELECT” by pressing the V or v
button.
4
Press the b button.
The INPUT SELECT sub menu appears.
5
Select the desired input signal by pressing the V or
v button.
When an analog input signal is selected:
When an S video cable is connected to the S-
VIDEO IN connector of the unit, the S video signal
is selected regardless of whether an S video signal
6 1
2,4 2,3,5
Input signal Setting
ANALOG To record an analog signal input to
the VIDEO IN or S-VIDEO IN
connector. (Factory setting)
i.LINK To record a standard DV digital
signal input to the DV IN (i.LINK)
connector.