JVC KD-SHX751 - Manual (Page 11)

11
ENGLISH
4
Finish the procedure.
To restore the stereo effect, repeat the same
procedure and select “Off” on step
3.
To tune in FM stations only with
strong signals—LO/DX (Local/
Distance-extreme)
If received signals are weak, you may only
hear noises. You can make this unit detect only
stations with sufficient signal strength while
searching for FM stations.
1
Enter the MODE menu (see page 5).
2
Select “LO/DX.”
3
Select “Local.”
• DX: To tune in to all receivable stations.
indicator lights up.
• Local: To tune in to only stations with
sufficient signal strength.
indicator lights up.
4
Finish the procedure.
DX
Local
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
2
Select the FM band (FM1 – FM3)
you want to store into.
3
Enter the MODE menu (see page 5).
4
Select “SSM.”
5
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
SOURCE
BACK
BAND
To be continued....
EN08-12_KD-SHX751[EY]f.indd 11 EN08-12_KD-SHX751[EY]f.indd 11 05.2.15 8:14:38 PM 05.2.15 8:14:38 PM