Samsung A460 - Manual (Page 20)

Section 2
18 Getting to Know Your Phone
Using the Travel Adapter
To use the travel charger provided with your phone:
1.
Plug the travel charger power cord into a wall outlet.
2.
Plug the other end of the travel charger into the bottom of the phone,
with the battery installed.
The LED on the phone indicates the following:
ᮣ
A red light with battery animation indicates the battery is charging.
ᮣ
A green light without animation indicates the battery is fully
charged.
ᮣ
A yellow light indicates that the battery is operating at a temperature
that is too high or too low, or that there is a poor connection. Make
sure the phone is resting in the charger slot.
It generally takes about four hours to fully recharge a completely
discharged battery. With the approved LiIon battery, it is practical to
recharge the battery before it becomes completely discharged.
To get the quickest charge for any battery:
ᮣ
Turn the phone off.
Accessory Interface Connector
The accessory interface connector at the bottom of the phone allows you
to connect the Travel Charger or Vehicle Power Adapter to the phone. It
also allows you to connect the optional USB Data cable to the phone. For
more information, see "Accessory Options" on page 108.