Silicon Optix 50HD - Manual (Page 16)

C
ONNECTIONS
Chapter 2
Connections
Before Setting Up
The Premiere 50HD DLP Projector is extremely flexible when considering installation
locations. The keystone feature enables you to place the projector at an angle to the
screen and digitally corrects the distortion of the skewed image. You can configure
the image for rear, mirror, or ceiling mounted projection.
When positioning the projector, follow these tips and precautions:
• Place the projector on a stable surface. When mounting the projector on the
ceiling, ensure that it is securely fastened to the ceiling mount.
• Ensure that the projector has enough space around it to provide proper venti-
lation.
• Place the projector so that the power cable and device cables are out of the
way of foot traffic.
• Ensure that the infrared ports are unobstructed to ensure that you have maxi-
mum range with the remote control.
Connections
This section covers connecting devices to the I/O sockets and ports on the rear
panel. See “Rear View” on page 5 for the location of the ports.
Power
The projector’s power supply is a universal input (100-240VAC)
Connecting Power
Connect the power cable to
the AC socket on the rear
panel.
AC socket