Sharp MD-MT180H - Manual (Page 39)

01/10/5 180H_E_6.fm
E-38
MD-MT180H
ENGLISH
Ref
e
rences
-E
rr
o
r M
ess
a
g
es
-
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
NO SIGNAL Poor connection of the digital cable.
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
The input signal has improper sam-
pling frequency.
PLAY MD You tried to record on a playback-only
disc.
PROTECTED The write protection tab of a MiniDisc
is set to the protected position.
You tried to record on a playback-only
disc.
SORRY Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a while and try the operation
again.)
ERROR MES-
SAGES
MEANING
TEMP OVER The temperature is too high.
(Turn off the power, and wait for a while.)
TOC FORM
(**) There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
TOC FULL There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
? DISC A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
There is an error in the signal recorded
on the disc.