Sharp MD-MT180H - Manual (Page 38)

01/10/5 180H_E_6.fm
E-37
MD-MT180H
ENGLISH
Ref
e
rences
-E
rr
o
r M
ess
a
g
es
-
Error Messages
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
BATT EMPTY The battery has run down.
BLANK MD Nothing is recorded.
(Replace the disc with a recorded disc.)
Can't COPY You tried to record from a copy prohib-
ited MiniDisc.
(Record using the analogue cable.)
You tried to record signals other than
music (such as data).
Can't EDIT A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can't PLAY You tried to play back a track that can-
not be played with this equipment.
Can't READ (*) The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
Can't REC Recording cannot be performed cor-
rectly due to vibration or shock.
ERROR MES-
SAGES
MEANING
Can'tSTAMP Stamp function does not work.
(Check the number of tracks.)
Can'tWRITE Cannot save the TOC information cor-
rectly to a MiniDisc.
DEFECT! The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
DISC FULL The disc is out of recording space.
Er-MD (**) The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
HOLD The unit is in the hold mode.
LOCKED You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
NO DISC A disc has not been loaded.