Sharp MD-MT180H - Manual (Page 13)

01/10/11 180H_E_3.fm
E-12
MD-MT180H
ENGLISH
B
asic Opera
ti
o
n
-Re
c
or
ding-
Notes:
Changing the volume level whilst recording does not affect
the recording.
You cannot adjust the bass level whilst recording.
Complete the operation within 7 seconds whilst selecting
the menus.
To interrupt recording
Press the button.
To resume recording, press the button again.
The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
Notes:
Whilst "TOC" appears, the MiniDisc recorded contents
have not yet been updated.
To prevent the new recording from being lost, it is not
possible to remove the MiniDisc whilst "TOC" is dis-
played.
To update the recorded contents of the Mini-
Disc
Press the :OFF/HOLD button whilst in the stop mode.
The power turns off after recorded contents have been
updated on the MiniDisc.
5
Press the MENU/CHRG button repeatedly to select
"REC MODE".
6
Press the ENTER/SYNC button.
7
Press the MENU/CHRG button repeatedly to select
the recording mode (page 18).
8
Press the ENTER/SYNC button.
The mode will be set automatically after 7 seconds
even if the ENTER/SYNC button is not pressed.
9
Press the button to start the MiniDisc unit re-
cording.
10
Begin playback on the stereo system, the output
will be recorded.
(2 times long recording)
(4 times long recording)
(Monaural recording)
(Stereo recording)
TOC display