beautypg.com

Install threaded tube clamp & clamp knob, Secure vise assemblies to brackets – Sanus Systems XAS1A User Manual

Page 5

background image

6901-100148 <01>

4: Install Threaded Tube Clamp & Clamp Knob

Slide the threaded tube clamps [05] onto the extension
tubes [03], aligning the notches in the threaded tube
clamp and cross tubes [02].

Snap the threaded tube clamps onto the cross tubes.

Thread a clamp knob [04] onto each threaded tube
clamp [05]. Do not tighten at this time.

[02]

[02]

[03]

[03]

[06]

[06]

[05]

[05]

5: Secure Vise assemblies to Brackets

4x

[07]

[22]

[04]

[01]

Do not overtighten the nut [22]. The vise assembly

[04] must rotate freely around the carriage bolt [07].

NOTE

See also other documents in the category Sanus Systems TV Accessories: