JVC KD-DB711 - Manual (Page 13)

13
ENGLISH
Tracking the same programme—
Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM RDS
station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, Network-
Tracking Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-REG” on page 23.
Programme A broadcasting on different
frequency areas (01 – 05)
To check the current clock time while
listening to an FM RDS station
PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
To select your favorite PTY code, and
activate the PTY Standby Reception, see
page 23.
• PTY Standby Reception also works for
searching a DAB service.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station or DAB service providing
the signals required for PTY Standby
Reception. The PTY indicator will stop
flashing and remain lit.
To deactivate the PTY Standby Reception,
select “OFF” for the PTY code (see page 23).
The PTY indicator goes off.
EN12-19_KD-DB711[EY]f.indd 13 EN12-19_KD-DB711[EY]f.indd 13 1/13/05 1:11:49 PM 1/13/05 1:11:49 PM