JVC KD-G731 - Manual (Page 4)

ENGLISH
4 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 26.
~
Turn on the power.
Ÿ
Enter the PSM settings.
!
]
⁄
Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
Select “24H/12H,” then “24H” (hour) or “12H” (hour).
@
Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
Detaching the control panel Attaching the control panel
CAUTION:
The lever comes out if you pressed the
0 button while the panel
is detached. If this happens, push the lever back into lock position
before attaching the panel.
Lever
EN02-05_KD-G731_003A_f.indd 4 EN02-05_KD-G731_003A_f.indd 4 1/3/07 6:11:19 PM 1/3/07 6:11:19 PM