Setting return to standby mode, Sleep mode, Power save mode – Sprint Nextel SCP-8400 User Manual
Page 77
Section 2B: Controlling Your Phone’s Settings
61
Setting Return to Standby Mode
This feature allows you to select the way to return to
standby mode.
To set this feature:
1.
Select
> Settings > Display > Others > Return to Idle.
2.
A message appears. Press OK (left softkey) to continue.
3.
Select Automatically or End Key.
Ⅲ
Automatically to return to standby mode
automatically when no key is pressed for 30 seconds.
Ⅲ
End Key to return to standby mode by pressing
.
Note:
End Key
setting affects the battery’s talk and standby times.
Sleep Mode
This feature helps conserve your battery power by restricting
the display.
To set this feature:
1.
Select
> Settings > Display > Others > Sleep Mode.
2.
Select Main LCD or Sub LCD.
3.
Select an option. (Select Off to deactivate this feature.)
Power Save Mode
This feature helps conserve your battery power by setting the
Main LCD and Sub LCD backlights to “Always Off,”and by
setting the Main LCD sleep mode to “after 30 sec.”and the Sub
LCD sleep mode to “after 5 sec.”
To set this feature:
1.
Select
> Settings > Display > Power Save Mode.
2.
A message appears. Press OK (left softkey) to continue.
3.
Select On. (Select Off to deactivate this feature.)
Your
Phone’
s
Settings