JVC KD-G531 - Manual (Page 14)

14
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS * 1 (bass), [–06 to +06]
Adjust the bass.
MID * 1 (mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE * 1 (treble), [–06 to +06]
Adjust the treble.
FAD * 2 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS * 1 (super bass), [S.BS ON or S.BS OFF],
[01 to 05, initial: 03] * 3
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
VOL (volume), [00 to 30 or 50 * 4 ]
Adjust the volume.
* 1 When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including “USER.”
* 2 If you are using a two-speaker system, set the fader
level to “00.”
* 3 Range adjustment for super bass is adjustable only
when it is set to “S.BS ON.“
* 4 Depending on the amplifier gain control setting. (See
page 16 for details.)
EN14-21KD-G531_003A_1.indd 14 EN14-21KD-G531_003A_1.indd 14 10/30/06 11:13:41 PM 10/30/06 11:13:41 PM