Sanyo 32LM5R - Manual (Page 14)

Ver. Page 13
7. Status Read Commands
7.1 Format
7.1.1 PC issues commands in format as below.
“CR” Command [CR] (PC  TV) or
“CR_” Command [CR] (PC  TV)
Command: See Status Read Command Table.
“_” means space.
7.1.2 When received command is appropriate, the TV returns a character line as the required data.
Required Data [CR] (TV  PC)
Required Data: A character line (See Status Read Command Table)
7.1.3 When the received command is not appropriate, the TV returns “?” to PC.
“?” [CR] (TV  PC)
7.2 Transfer Example
Get input mode for TV by Basic Commands.
Command (issues current input mode command)
PC → TV “C” “R” “1” CR
TV → PC “1” CR
←―――→ Response
(A few
ms ～ 1s )
(Showing Computer 1 is selected)