Sharp XL-MP150E - Manual (Page 44)

03/12/17 XL-MP150E 29-44.fm
44
XL-MP150E
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source AC 230 - 240 V, 50 Hz
Power
consumption 100 W
Dimensions Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight 6.4 kg (14.1 lbs.)
Output power MPO: 376 W (188 W + 188 W) (10% T.H.D.)
RMS: 200 W (100 W + 100 W) (10% T.H.D.)
RMS: 160 W (80 W + 80 W) (0.9% T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
USB input: USB type
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.50 - 108.00 MHz
AM: 522 - 1,620 kHz
Frequency
response 50 - 14,000 Hz (normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Type 2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input
power 200 W
Rated input power 100 W
Impedance 6 ohms
Dimensions Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 260 mm (10-1/4")
Weight 3.1 kg (6.8 lbs.)/each