Sharp XL-MP150E - Manual (Page 33)

03/12/17 XL-MP150E 29-44.fm
33
XL-MP150E
Advanced Features
Listening to audio data playing on a PC
Notes:
1 Connect the unit to the PC with a USB cable (see page 30).
2 Turn on a PC to boot the OS.
Wait until the OS boots.
3 Press the ON/STAND-BY button on the main unit to turn
the power on.
4 Press the VIDEO/AUX/USB button repeatedly to select
“USB”.
5 Play back on the PC.
6 Adjust the volume on the unit.
You can adjust the volume with music software. This is not pos-
sible from “Audio Properties” in the task tray (Windows).
When using a USB port, do not turn off the unit or switch the input
selector during playback.
Do not disconnect a USB cable during playback. Close the music
software first.
Before you turn off the unit or PC, close the music software.
Turn off the unit before the PC.
It is recommended to turn off the unit before putting the PC into
hibernation or standby mode.
Sound may skip or noise may occur depending on the PC
environment.
Refer to operation manuals for the PC and music software.
When using a Macintosh computer (with the unit connected and
turned off) and the operation is unstable, disconnect the USB
cable.
When playing back on a PC with the unit connected, other sounds
(clicks, etc.) are produced from the speakers.
During playback on a Windows PC, you cannot listen to the sound
on the unit by simply connecting a USB cable. Stop and resume
playback (not necessary on a Macintosh computer).