Sharp XL-MP150E - Manual (Page 10)

03/12/17 XL-MP150E_09-18.fm
10
XL-MP150E
Preparation for Use
System connections (continued)
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
Notes:
The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Demonstration mode
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Cooling fan:
This main unit is built with a cooling fan at the rear of the unit for
improved cooling. Please do not cover the opening of the fan with
any obstacles, as this will block proper ventilation.
RATED SPEAKER IMPEDANCE: 6 OHMS MIN.
AC INPUT
ANTENNA
RIGHT
RIGHT LEFT
FM 75 OHMS
AM LOOP
VIDEO/AUX IN
SUBWOOFER PRE-OUT
SPEAKERS
LEFT
Wall socket
(AC 230 - 240 V, 50 Hz)
RATED SPEAKER IMPEDANCE: 6 OHMS MIN.
AC INPUT
RIGHT
RIGHT LEFT
VIDEO/AUX IN
SUBWOOFER PRE-OUT
SPEAKERS
LEFT
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by
mode (demonstration mode), press the
X-BASS (SURROUND)/DEMO button.
The unit will enter the low power con-
sumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS
(SURROUND)/DEMO button again.
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button
can be used to select the extra bass mode.
ANTENNA
FM
75 OHMS
AM
LOOP
External FM aerial
X-BASS (SURROUND) /DEMO