beautypg.com

Remote starting automatic transmission mode, Shut down, Quick stop – ScyTek Electronics 100RS User Manual

Page 9

background image

Astra 100RS - Page 5

Remote Starting Automatic Transmission Mode

To Remote Start the System:

1. Be sure the system is not in Valet Mode.

2. Press and hold the Button for more than 1-second.

· The parking lights will flash twice.
· The engine will start and run for the duration of its programmed Run Time.
· The heater or air conditioner will turn on (if turned on prior to exiting the vehicle).

*If the engine fails to start on the first attempt, it will repeat the starting procedure 2 more times. If the vehicle

fails to start after a total of 3 times the parking lights will flash 4 times and the doors will lock (if installed).

Unlock doors, turn on the ignition and press the brake pedal to disengage the remote start feature and
drive the vehicle.

Shut Down

When the the Remote Start feature is active, any of the following actions will shutdown the engine:

1. Pressing the Button on the Transmitter.
2. Pressing the Brake Pedal.
3. Opening the Hood.
4. Remote Start Time-Out (completion of the timed run cycle).

Quick Stop

(Automatic Transmission Only)

The Quick Stop Feature allows you to exit the vehicle while keeping the engine running for quick stops.

To leave the vehicle running:

1. Press the Button on the Transmitter while the engine is running with the key.

2. The parking lights will turn on. Now turn the ignition key Off and the vehicle will continue to run.
3. You may now exit the vehicle and lock the doors.

To resume control of the vehicle:

1. Unlock the doors
2. Turn on the ignition.
3. Press the Brake Pedal to disengage the remote start.