Sharp UX-340L User Manual
Page 42
Setting Up and Using OpenLCR
40
READY TO SEND
Fax transmission test
Even if you are not ready to register for OpenLCR service, we
recommend that you test your fax setup by filling out Section A of the
Fax Transmission Test and OpenLCR Line Activation Form
and
faxing it to OpenLCR as shown below. The test is free of charge and
does not place you under any obligation to register with OpenLCR.
♦
If the test sheet is successfully transmitted, it will be faxed back to
you on the same connection. This lets you confirm that your setup is
okay.
♦
After receiving the test sheet, the current date and time will
automatically be programmed in your fax machine. This saves you
the trouble of setting the date and time in the fax yourself.
1
Place the form with Section A face
down, and push it gently into the
document feeder of the fax machine.
The display will show:
2
Press the OpenLCR key, the 5 key,
and then the START/MEMORY key.
•
Your fax machine will automatically
call OpenLCR and send the form. The
form will then be faxed back to you,
and the current date and time
programmed in your fax machine.
START/MEMORY
5
OpenLCR
all-ux340L.book Page 40 Thursday, December 23, 1999 5:37 PM