Smeg SLB510.1 - Manual (Page 7)

Instructions for Use 9
The end of the outlet hose should be raised from the floor by not more
than 100 cm and not less than 60 cm. If the hose is positioned higher
than recommended, the machine will not pump out the water.
Connection to Power Supply
Connect the appliance to the power supply with a cable cord. The wall
socket should be equipped with an earth contact (safety socket).
Fixed connection should be carried out by an expert.
Rated voltage, frequency and other data are listed on the rating plate of
the machine.
Your washing machine should be grounded and connected to the
power supply according to local electricity board regulations and
standards.
WARNING!
In the supply cord is damaged, it must be replaced by the
manufacturer or his service agent or a qualified person in order to
avoid hazard.
•
The appliance should be placed in the position, where the plug is
within reach.